APT M117 vs. M160 vs. M190: How to Choose a Paving Breaker

Start with the material you need to break, the room the operator has to work, and the air your compressor can deliver. The APT M117, M160 and M190 cover different jobs, and their air requirements are far enough apart to change what makes sense on your site.

Compare the three APT models

• APT M117. Start here for lighter concrete demolition and tighter work areas. The listed tool weighs 33 lb and uses 34–38 CFM at 90 PSI.
• APT M160. Consider this for general pavement or concrete removal when you can handle the heavier tool and have the air to run it. The listed tool weighs 68 lb and uses 60–65 CFM at 90 PSI.
• APT M190. Consider this for heavier demolition where the material and site justify the largest of the three. The listed tool weighs 90 lb and uses 75–80 CFM at 90 PSI.

Check air delivery and the steel you already own

Bring the compressor’s rated airflow at the required pressure, the hose length and diameter, and the number of tools that may run together. The published figures describe the tool. Compressor sizing depends on the rest of the setup, including line losses and other equipment drawing air. If you want to reuse bits, measure the hex shank and its length so we can check the exact chuck configuration before quoting.

What to send with your quote request

Describe the surface and approximate thickness, how much material needs to come out, any tight access, your preferred model and quantity, and the air supply available. Include the bit or shank size if you have it.

Request an APT paving breaker quote from Triangle Truck Parts to confirm the model, configuration, pricing and availability.

Manufacturer reference: APT paving breaker specifications.